Hi all

question.. i have fsxnet as my main "addresS" as that was the first FTN I managed to get going and so forth.

i also have micronet and fido as "alternates" (for want of a better way of putting it).

the question is, when someone netmails me from fido, it automatically replys with an FSX net address.

obviously i have either screwed something up (highly likely) or im missing something (equally as likely).

as of right now i found the "let user pick source address" in SCFG, but that's not ideal I'd love for it to automatically pickt he right FTN in a netmail.

echos are working fine after the same thign was pointed out to me and how to fix that one :D Just netmail i've been struggling with.

regards

Charles Blackburn
---

Charles Blackburn
The F.B.O BBS 21:1/221 618:250/36
bbs.thefbo.us IPV4/V6
DOVE-Net FSX-Net MicroNET USENET




... Preparation, knowledge, and discipline can deal with any form of danger. ---
þ Synchronet þ The FBO BBS - bbs.thefbo.us - A place for aviation fun....

Re: Automatic Network selection for netmail
By: Charles Blackburn to All on Sat Oct 08 2022 02:11 pm

Hi all

question.. i have fsxnet as my main "addresS" as that was the first FTN I managed to get going and so forth.

i also have micronet and fido as "alternates" (for want of a better way of putting it).

the question is, when someone netmails me from fido, it automatically replys with an FSX net address.

obviously i have either screwed something up (highly likely) or im missing something (equally as likely).

as of right now i found the "let user pick source address" in SCFG, but that's not ideal I'd love for it to automatically pickt he right FTN in a netmail.

echos are working fine after the same thign was pointed out to me and how to fix that one :D Just netmail i've been struggling with.

The built-in netmailing feature in Synchronet has the logic to match the source zone:net with the destination zone:net (or just zone) automatically. Is the person netmailing you from fido netmailing from a different zone than yours?
--
digital man (rob)

Synchronet/BBS Terminology Definition #90:
UTF-8 = 8-bit Unicode Transformation Format
Norco, CA WX: 75.0øF, 63.0% humidity, 2 mph ESE wind, 0.00 inches rain/24hrs ---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: Automatic Network selection for netmail
By: Digital Man to Charles Blackburn on Sat Oct 08 2022 19:58:30

as of right now i found the "let user pick source address" in SCFG, but that's not ideal I'd love for it to
automatically pickt he right FTN in a netmail.
echos are working fine after the same thign was pointed out to me and how to fix that one :D Just netmail i've been
struggling with.

The built-in netmailing feature in Synchronet has the logic to match the source zone:net with the destination zone:net (or
just zone) automatically. Is the person netmailing you from fido netmailing from a different zone than yours?

yea i was in zone 1 he was in zone 2.

regards

Charles Blackburn
---

Charles Blackburn
The F.B.O BBS 21:1/221 618:250/36
bbs.thefbo.us IPV4/V6
DOVE-Net FSX-Net MicroNET USENET




... I've had enough of gardening - I'm just about ready to throw in the trowel ---
þ Synchronet þ The FBO BBS - bbs.thefbo.us - A place for aviation fun....

Charles Blackburn wrote to Digital Man <=-

yea i was in zone 1 he was in zone 2.
regards
Charles Blackburn

There seems to be something wrong with your Shift key.

You should fix that so people don't confuse you with MRO.



... Press any key to continue or any other key to quit
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Re: Re: Automatic Network selection for netmail
By: Gamgee to Charles Blackburn on Sun Oct 09 2022 15:34:00

Charles Blackburn wrote to Digital Man <=-

yea i was in zone 1 he was in zone 2.
regards
Charles Blackburn

There seems to be something wrong with your Shift key.

huh ?

i might be old but im easily confused :D

regards

Charles Blackburn
===

Charles Blackburn
The F.B.O BBS 21:1/221 618:250/36
bbs.thefbo.us IPV4/V6
DOVE-Net FSX-Net MicroNET USENET




... A good man dies when a boy goes wrong.
--- SBBSecho 3.15-Linux
* Origin: The FBO BBS - bbs.thefbo.us (1:135/395)
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: Automatic Network selection for netmail
By: Charles Blackburn to Digital Man on Sun Oct 09 2022 08:12 am

Re: Automatic Network selection for netmail
By: Digital Man to Charles Blackburn on Sat Oct 08 2022 19:58:30

as of right now i found the "let user pick source address" in SCFG, but that's not ideal I'd love for it to
automatically pickt he right FTN in a netmail.
echos are working fine after the same thign was pointed out to me and how to fix that one :D Just netmail i've been
struggling with.

The built-in netmailing feature in Synchronet has the logic to match the source zone:net with the destination zone:net (or
just zone) automatically. Is the person netmailing you from fido netmailing from a different zone than yours?

yea i was in zone 1 he was in zone 2.

Well that explains why. Synchronet doesn't know that zone 1 and zone 2 are part of the same "network".
--
digital man (rob)

Rush quote #1:
Danger plus survival equals fun. - Neil Peart
Norco, CA WX: 81.5øF, 47.0% humidity, 11 mph S wind, 0.00 inches rain/24hrs
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Charles Blackburn wrote to Gamgee <=-

yea i was in zone 1 he was in zone 2.
regards
Charles Blackburn

There seems to be something wrong with your Shift key.

huh ?
i might be old but im easily confused :D

Well.... was trying to be humorous about it... but. The Shift key. You
know, the one that when held down and then a letter key is pressed,
makes that letter appear as a CAPITALIZED letter. You know, the
generally accepted correct way to write a proper sentence in English.
The way they taught you in school.

The rest of my comment was regarding 'MRO', who also never capitalizes anything, and well..... you know.



... So easy, a child could do it. Child sold separately.
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Re: Re: Automatic Network selection for netmail
By: Gamgee to Charles Blackburn on Sun Oct 09 2022 18:34:00

Charles Blackburn wrote to Gamgee <=-

There seems to be something wrong with your Shift key.

huh ?
i might be old but im easily confused :D

Well.... was trying to be humorous about it... but. The Shift key. You know, the one that when held down and then a letter key is pressed,
makes that letter appear as a CAPITALIZED letter. You know, the

noooo really? i thought that's what the CAPS LOCK button was for :P

generally accepted correct way to write a proper sentence in English.
The way they taught you in school.
The rest of my comment was regarding 'MRO', who also never capitalizes anything, and well..... you know.

yea i know, but i'm too lazy to do that. it doesn't make it any less readable :D

regards
===

Charles Blackburn
The F.B.O BBS 21:1/221 618:250/36
bbs.thefbo.us IPV4/V6
DOVE-Net FSX-Net MicroNET USENET




... Milhouse, we live in the age of cooties! - Bart Simpson
--- SBBSecho 3.15-Linux
* Origin: The FBO BBS - bbs.thefbo.us (1:135/395)
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Charles Blackburn wrote to Gamgee <=-

There seems to be something wrong with your Shift key.

huh ?
i might be old but im easily confused :D

Well.... was trying to be humorous about it... but. The Shift key. You know, the one that when held down and then a letter key is pressed,
makes that letter appear as a CAPITALIZED letter. You know, the

noooo really? i thought that's what the CAPS LOCK button was for :P

That's similar to the Shift key, but not the same.

generally accepted correct way to write a proper sentence in English.
The way they taught you in school.
The rest of my comment was regarding 'MRO', who also never capitalizes

anyt

hing, and well..... you know.

yea i know, but i'm too lazy to do that. it doesn't make it any
less readable :D

Well, actually it does.

It also makes you seem like MRO, which is not a good thing. Only people
who dropped out of school at about 4th/5th grade write like that.

Really. Do yourself a favor and write like an adult.



... He does the work of 3 Men...Moe, Larry & Curly
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

On 10/9/2022 19:33, Digital Man wrote:

Re: Automatic Network selection for netmail
By: Charles Blackburn to Digital Man on Sun Oct 09 2022 08:12 am

> yea i was in zone 1 he was in zone 2.

Well that explains why. Synchronet doesn't know that zone 1 and zone 2 are part of the same "network".

Is there a way to let Synchronet know that zones 1 through 4 are all in Fidonet?

---
þ Synchronet þ IPTIA - bbs2.ipingthereforeiam.com:2323

Re: Automatic Network selection for netmail
By: Digital Man to Charles Blackburn on Sun Oct 09 2022 16:33:09

The built-in netmailing feature in Synchronet has the logic to match the source zone:net with the destination zone:net (or
just zone) automatically. Is the person netmailing you from fido netmailing from a different zone than yours?

yea i was in zone 1 he was in zone 2.

Well that explains why. Synchronet doesn't know that zone 1 and zone 2 are part of the same "network".

is there any way outside of "selecting manually" the origin address to do it?

for example, i noticed in (i think it was) echobbs where you specify your hubs. I have 1:xxx/xxx and 1:ALL - can i do 2:ALL ?

regards
---

Charles Blackburn
The F.B.O BBS 21:1/221 618:250/36
bbs.thefbo.us IPV4/V6
DOVE-Net FSX-Net MicroNET USENET




... A fanatic is one who can't change his mind and won't change the subject. ---
þ Synchronet þ The FBO BBS - bbs.thefbo.us - A place for aviation fun....

dragon wrote to Digital Man <=-

Re: Automatic Network selection for netmail
By: Charles Blackburn to Digital Man on Sun Oct 09 2022 08:12 am

> yea i was in zone 1 he was in zone 2.

Well that explains why. Synchronet doesn't know that zone 1 and zone
2 are part of the same "network".

Is there a way to let Synchronet know that zones 1 through 4 are
all in Fidonet?

Certainly. From my /sbbs/ctrl/sbbsecho.ini :

[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix = binkp.net
NodeList = /sbbs/fido/nodelist/NODELIST.217

(that last line may vary according to your preferences)

You should have a "domain" declaration section for each network that
your system is connected to.



... Computer Hacker wanted. Must have own axe.
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Charles Blackburn wrote to Digital Man <=-

Re: Automatic Network selection for netmail
By: Digital Man to Charles Blackburn on Sun Oct 09 2022
16:33:09

The built-in netmailing feature in Synchronet has the logic to match

the

source zone:net with the destination zone:net (or

just zone) automatically. Is the person netmailing you from fido

netmail

ing from a different zone than yours?

yea i was in zone 1 he was in zone 2.

Well that explains why. Synchronet doesn't know that zone 1 and zone 2 are

part of the same "network".

is there any way outside of "selecting manually" the origin
address to do it?

for example, i noticed in (i think it was) echobbs where you
specify your hubs. I have 1:xxx/xxx and 1:ALL - can i do 2:ALL ?

Yes, you certainly can, and certainly *should*.

Also, in a previous reply I made in this thread, you can/should specify
what zones belong to what networks. In your sbbsecho.ini file you
should have something similar to this:

[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix = binkp.net
NodeList = /sbbs/fido/nodelist/NODELIST.217

[domain:fsxnet]
Zones = 21
DNSSuffix = fsxnet.nz
NodeList = /sbbs/fido/nodelist/FSXNET.217

etc, etc...



... Gone crazy, be back later, please leave message.
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Re: Re: Automatic Network selection for netmail
By: dragon to Digital Man on Sun Oct 09 2022 11:28 pm

Subject: Re: Automatic Network selection for netmail
@MSGID: <63439171.39080.dove-syncdisc@bbs2.ipingthereforeiam.com>
@REPLY: <63435A35.48370.sync@vert.synchro.net>
@TZ: ff10
On 10/9/2022 19:33, Digital Man wrote:

Re: Automatic Network selection for netmail
By: Charles Blackburn to Digital Man on Sun Oct 09 2022 08:12 am

> yea i was in zone 1 he was in zone 2.

Well that explains why. Synchronet doesn't know that zone 1 and zone 2 are part of the same "network".

Is there a way to let Synchronet know that zones 1 through 4 are all in Fidonet?

Not currently. I created this issue to track this request however: https://gitlab.synchro.net/main/sbbs/-/issues/447
--
digital man (rob)

Synchronet "Real Fact" #63:
"Baja" (name of Synchronet PCMS compiler/languege) is pronounced "ba-ha"
Norco, CA WX: 66.6øF, 90.0% humidity, 2 mph ESE wind, 0.00 inches rain/24hrs ---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: Re: Automatic Network selection for netmail
By: Gamgee to dragon on Mon Oct 10 2022 08:11 am

dragon wrote to Digital Man <=-

Re: Automatic Network selection for netmail
By: Charles Blackburn to Digital Man on Sun Oct 09 2022 08:12 am

> yea i was in zone 1 he was in zone 2.

Well that explains why. Synchronet doesn't know that zone 1 and zone
2 are part of the same "network".

Is there a way to let Synchronet know that zones 1 through 4 are
all in Fidonet?

Certainly. From my /sbbs/ctrl/sbbsecho.ini :

[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix = binkp.net
NodeList = /sbbs/fido/nodelist/NODELIST.217

(that last line may vary according to your preferences)

You should have a "domain" declaration section for each network that
your system is connected to.

Synchronet (e.g. sbbs) doesn't read/use the sbbsecho.ini file, so it doesn't know anything about FTN domains.
--
digital man (rob)

Breaking Bad quote #51:
I did it for me. I liked it. I was good at it. And.. I was really.. I was alive Norco, CA WX: 66.6øF, 90.0% humidity, 2 mph ESE wind, 0.00 inches rain/24hrs ---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

On 10/10/2022 09:11, Gamgee wrote:

dragon wrote to Digital Man <=-

dr> Is there a way to let Synchronet know that zones 1 through 4 are
dr> all in Fidonet?

Certainly. From my /sbbs/ctrl/sbbsecho.ini :

[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix = binkp.net
NodeList = /sbbs/fido/nodelist/NODELIST.217

(that last line may vary according to your preferences)

You should have a "domain" declaration section for each network that
your system is connected to.

Thanks. I found this shortly after I sent my post.

---
þ Synchronet þ IPTIA - bbs2.ipingthereforeiam.com:2323

On 10/10/2022 13:38, Digital Man wrote:

> You should have a "domain" declaration section for each network that
> your system is connected to.

Synchronet (e.g. sbbs) doesn't read/use the sbbsecho.ini file, so it doesn't know anything about FTN domains.

Wouldn't it make more sense if it did?

---
þ Synchronet þ IPTIA - bbs2.ipingthereforeiam.com:2323

Re: Re: Automatic Network selection for netmail
By: dragon to Digital Man on Mon Oct 10 2022 02:42 pm

Subject: Re: Automatic Network selection for netmail
@MSGID: <63446782.39089.dove-syncdisc@bbs2.ipingthereforeiam.com>
@REPLY: <634458A6.48380.sync@vert.synchro.net>
@TZ: ff10
On 10/10/2022 13:38, Digital Man wrote:

> You should have a "domain" declaration section for each network that
> your system is connected to.

Synchronet (e.g. sbbs) doesn't read/use the sbbsecho.ini file, so it doesn't know anything about FTN domains.

Wouldn't it make more sense if it did?

Synchronet doesn't support 5D FTN addresses, nor do I see a need for it to, so no: I don't think it'd make more sense if sbbs used the sbbsecho.ini file for this purpsoe.
--
digital man (rob)

Breaking Bad quote #27:
Other than Gomey here pees sitting down, here's what we know. - Hank Schrader Norco, CA WX: 81.8øF, 55.0% humidity, 5 mph SSE wind, 0.00 inches rain/24hrs ---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Digital Man wrote to Gamgee <=-

Re: Re: Automatic Network selection for netmail
By: Gamgee to dragon on Mon Oct 10 2022 08:11 am

Well that explains why. Synchronet doesn't know that zone 1 and zone
2 are part of the same "network".

Is there a way to let Synchronet know that zones 1 through 4 are
all in Fidonet?

Certainly. From my /sbbs/ctrl/sbbsecho.ini :

[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix = binkp.net
NodeList = /sbbs/fido/nodelist/NODELIST.217

(that last line may vary according to your preferences)

You should have a "domain" declaration section for each network that
your system is connected to.

Synchronet (e.g. sbbs) doesn't read/use the sbbsecho.ini file, so
it doesn't know anything about FTN domains.

But.... we're talking about netmail... Isn't netmail sent with
sbbsecho?

When I write a netmail to someone in Zone 2, the choice of originating
FTN address defaults to my Zone 1 address. Same if I write to Zone 3 or
4. If I write to Zone 21, it "knows" to default to my Zone 21 address
as originator.

<PUZZLED>



... Gone crazy, be back later, please leave message.
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

On 10/10/2022 18:19, Digital Man wrote:

Re: Re: Automatic Network selection for netmail
By: dragon to Digital Man on Mon Oct 10 2022 02:42 pm

> Subject: Re: Automatic Network selection for netmail
> @MSGID: <63446782.39089.dove-syncdisc@bbs2.ipingthereforeiam.com>
> @REPLY: <634458A6.48380.sync@vert.synchro.net>
> @TZ: ff10
> On 10/10/2022 13:38, Digital Man wrote:
>
> > > You should have a "domain" declaration section for each network that
> > > your system is connected to.
>
> > Synchronet (e.g. sbbs) doesn't read/use the sbbsecho.ini file, so it
> > doesn't know anything about FTN domains.
>
> Wouldn't it make more sense if it did?

Synchronet doesn't support 5D FTN addresses, nor do I see a need for it to, so no: I don't think it'd make more sense if sbbs used the sbbsecho.ini file for this purpsoe.

OK. So I must be missing something. Is it possible for a Fidonet zone
1 node to exchange netmail with a Fidonet zone 2 node via a Synchronet BBS?

---
þ Synchronet þ IPTIA - bbs2.ipingthereforeiam.com:2323

Re: Re: Automatic Network selection for netmail
By: Gamgee to Digital Man on Mon Oct 10 2022 09:39 pm

Digital Man wrote to Gamgee <=-

Re: Re: Automatic Network selection for netmail
By: Gamgee to dragon on Mon Oct 10 2022 08:11 am

Well that explains why. Synchronet doesn't know that zone 1 and zone
2 are part of the same "network".

Is there a way to let Synchronet know that zones 1 through 4 are
all in Fidonet?

Certainly. From my /sbbs/ctrl/sbbsecho.ini :

[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix = binkp.net
NodeList = /sbbs/fido/nodelist/NODELIST.217

(that last line may vary according to your preferences)

You should have a "domain" declaration section for each network that
your system is connected to.

Synchronet (e.g. sbbs) doesn't read/use the sbbsecho.ini file, so
it doesn't know anything about FTN domains.

But.... we're talking about netmail... Isn't netmail sent with
sbbsecho?

Normally, yes, but that's not strictly required. SBBSecho is the officially supported FTN tosser/scanner, but it hasn't always been the *only* one.

When I write a netmail to someone in Zone 2, the choice of originating
FTN address defaults to my Zone 1 address. Same if I write to Zone 3 or
4. If I write to Zone 21, it "knows" to default to my Zone 21 address
as originator.

<PUZZLED>

What are you puzzled about?
--
digital man (rob)

Sling Blade quote #19:
Doyle: I can't so much as drink a damn glass of water around a midget
Norco, CA WX: 65.0øF, 88.0% humidity, 3 mph ESE wind, 0.00 inches rain/24hrs ---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: Re: Automatic Network selection for netmail
By: dragon to Digital Man on Mon Oct 10 2022 10:07 pm

Subject: Re: Automatic Network selection for netmail
@MSGID: <6344CFED.39091.dove-syncdisc@bbs2.ipingthereforeiam.com>
@REPLY: <63449A76.48383.sync@vert.synchro.net>
@TZ: ff10
On 10/10/2022 18:19, Digital Man wrote:

Re: Re: Automatic Network selection for netmail
By: dragon to Digital Man on Mon Oct 10 2022 02:42 pm

> Subject: Re: Automatic Network selection for netmail
> @MSGID: <63446782.39089.dove-syncdisc@bbs2.ipingthereforeiam.com>
> @REPLY: <634458A6.48380.sync@vert.synchro.net>
> @TZ: ff10
> On 10/10/2022 13:38, Digital Man wrote:
>
> > > You should have a "domain" declaration section for each network that
> > > your system is connected to.
>
> > Synchronet (e.g. sbbs) doesn't read/use the sbbsecho.ini file, so it
> > doesn't know anything about FTN domains.
>
> Wouldn't it make more sense if it did?

Synchronet doesn't support 5D FTN addresses, nor do I see a need for it to, so no: I don't think it'd make more sense if sbbs used the sbbsecho.ini file for this purpsoe.

OK. So I must be missing something. Is it possible for a Fidonet zone
1 node to exchange netmail with a Fidonet zone 2 node via a Synchronet BBS?

Yes, of course.
--
digital man (rob)

Synchronet "Real Fact" #48:
Synchronet directory naming (i.e. ctrl, exec, data) was suggested by S. Deppe Norco, CA WX: 65.0øF, 88.0% humidity, 3 mph ESE wind, 0.00 inches rain/24hrs ---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Digital Man wrote to Gamgee <=-

Re: Re: Automatic Network selection for netmail
By: Gamgee to Digital Man on Mon Oct 10 2022 09:39 pm

Is there a way to let Synchronet know that zones 1 through 4 are
all in Fidonet?

Certainly. From my /sbbs/ctrl/sbbsecho.ini :

[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix = binkp.net
NodeList = /sbbs/fido/nodelist/NODELIST.217

You should have a "domain" declaration section for each network that
your system is connected to.

Synchronet (e.g. sbbs) doesn't read/use the sbbsecho.ini file, so
it doesn't know anything about FTN domains.

But.... we're talking about netmail... Isn't netmail sent with
sbbsecho?

Normally, yes, but that's not strictly required. SBBSecho is the officially supported FTN tosser/scanner, but it hasn't always
been the *only* one.

Okay.... but for most (nearly all) current SBBS sysops, it's what is
being used, I'd guess. I understand what you're saying about *SBBS* not
using sbbsecho.ini, but for all intents and purposes, the *BBS system*
is using it for knowing how to send/route netmail.

When I write a netmail to someone in Zone 2, the choice of originating
FTN address defaults to my Zone 1 address. Same if I write to Zone 3 or
4. If I write to Zone 21, it "knows" to default to my Zone 21 address
as originator.

<PUZZLED>

What are you puzzled about?

I guess I'm puzzled at how defining the FTN domains in sbbsecho.ini
isn't the correct answer to the original question about having FidoNet
know it uses Zones 1-4. It sure seems to be doing that on my system.


... Gone crazy, be back later, please leave message.
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Re: Re: Automatic Network selection for netmail
By: Gamgee to Digital Man on Tue Oct 11 2022 05:37 pm

What are you puzzled about?

I guess I'm puzzled at how defining the FTN domains in sbbsecho.ini
isn't the correct answer to the original question about having FidoNet
know it uses Zones 1-4. It sure seems to be doing that on my system.

The original question was about having Synchronet (sbbs) set the default source address to another zone within the same network/domain when replying a netmail message. I think my recent commit addresses the request.
--
digital man (rob)

Synchronet/BBS Terminology Definition #52:
MUD = Multi-User Dungeon
Norco, CA WX: 75.7øF, 65.0% humidity, 3 mph SE wind, 0.00 inches rain/24hrs
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: Re: Automatic Network selection for netmail
By: Gamgee to Charles Blackburn on Sun Oct 09 2022 21:27:00

Charles Blackburn wrote to Gamgee <=-

There seems to be something wrong with your Shift key.

<CUT>

noooo really? i thought that's what the CAPS LOCK button was for :P

That's similar to the Shift key, but not the same.

same same but different :D I get it

<CUT>

yea i know, but i'm too lazy to do that. it doesn't make it any
less readable :D

Well, actually it does.

wanna borrow my glasses? I have a couple spare pairs :D

It also makes you seem like MRO, which is not a good thing. Only people who dropped out of school at about 4th/5th grade write like that.
Really. Do yourself a favor and write like an adult.

YOU KNW I COULD WRITE LIKE THIS. I MEAN I KNOW ITS SHOUTING AND ALL THAT BUT I KNOW A LOT OF ADULTS THAT WRITE LIKE THIS TOO! :D

or maybe i could just say... well if you don't like it then just don't read it.. simple as.

I learned a long time ago that if people don't like what i say or the way i type, then that's their problem not mine.

as the saying goes... "my f**ks left a long time ago and i didnt even give them out" :D

regards
---

Charles Blackburn
The F.B.O BBS 21:1/221 618:250/36
bbs.thefbo.us IPV4/V6
DOVE-Net FSX-Net MicroNET USENET




... He knew everything about literature, except how to enjoy it.
---
þ Synchronet þ The FBO BBS - bbs.thefbo.us - A place for aviation fun....

Re: Re: Automatic Network selection for netmail
By: Gamgee to dragon on Mon Oct 10 2022 08:11:00

dragon wrote to Digital Man <=-

Re: Automatic Network selection for netmail
By: Charles Blackburn to Digital Man on Sun Oct 09 2022 08:12 am

<CUT>

Is there a way to let Synchronet know that zones 1 through 4 are
all in Fidonet?

Certainly. From my /sbbs/ctrl/sbbsecho.ini :

[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix = binkp.net
NodeList = /sbbs/fido/nodelist/NODELIST.217

SWEET thanks, appreciate it. I figured there had to be an easy way :D

regards
---

Charles Blackburn
The F.B.O BBS 21:1/221 618:250/36
bbs.thefbo.us IPV4/V6
DOVE-Net FSX-Net MicroNET USENET




... Mongo LIKE Candygram.
---
þ Synchronet þ The FBO BBS - bbs.thefbo.us - A place for aviation fun....

When I write a netmail to someone in Zone 2, the choice of originating
FTN address defaults to my Zone 1 address. Same if I write to Zone 3 or
4. If I write to Zone 21, it "knows" to default to my Zone 21 address
as originator.

That may have something to do with how you set up your FTN addresses in
SCFG. If your default address is a Z1 address, it is probably going to use that one for any other zones it does not find a match for.

There are also some settings in sbbsecho.ini, but I am not sure if it uses those for picking the zone to put on the netmail or only to route it, i.e.

[node:2:ALL]
(stuff removed)
Route = 1:154/10
[node:3:ALL]
(stuff removed)
Route = 1:154/10
[node:4:ALL]
(stuff removed)
Route = 1:154/10


* SLMR 2.1a * Reality-O-Meter: [\.......] Hmmph! Thought so.

---
þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP

Re: Re: Automatic Network selection for netmail
By: Gamgee to Digital Man on Tue Oct 11 2022 05:37 pm

Normally, yes, but that's not strictly required. SBBSecho is the
officially supported FTN tosser/scanner, but it hasn't always
been the *only* one.

Okay.... but for most (nearly all) current SBBS sysops, it's what is being used, I'd guess. I understand what you're saying about *SBBS* not using sbbsecho.ini, but for all intents and purposes, the *BBS system*
is using it for knowing how to send/route netmail.

Yeah, that's basically how I think of it. Since sbbsecho is included with Synchronet (and I think has been since I started using Synchronet), I tend to think of sbbsecho as a component of Synchronet/SBBS. And sbbsecho seems to do the job, and I don't know of another tosser I'd rather use in place of it.

Nightfox

---
þ Synchronet þ Digital Distortion: digitaldistortionbbs.com

Digital Man wrote to Gamgee <=-

Re: Re: Automatic Network selection for netmail
By: Gamgee to Digital Man on Tue Oct 11 2022 05:37 pm

What are you puzzled about?

I guess I'm puzzled at how defining the FTN domains in sbbsecho.ini
isn't the correct answer to the original question about having FidoNet
know it uses Zones 1-4. It sure seems to be doing that on my system.

The original question was about having Synchronet (sbbs) set the
default source address to another zone within the same
network/domain when replying a netmail message. I think my recent
commit addresses the request.

I've no doubt that it does.

I also believe that defining the Zones in sbbsecho.ini does that too,
with the assumption that SBBS is using sbbsecho. I understand the
dangers of making assumptions, especially when programming a complicated
beast such as what we're talking about, and why it's correct to do it
the way you have. Your efforts are very much appreciated! :-)


... Gone crazy, be back later, please leave message.
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Re: Re: Automatic Network sel
By: Dumas Walker to GAMGEE on Tue Oct 11 2022 16:31:00

When I write a netmail to someone in Zone 2, the choice of originating
FTN address defaults to my Zone 1 address. Same if I write to Zone 3 or
4. If I write to Zone 21, it "knows" to default to my Zone 21 address
as originator.

That may have something to do with how you set up your FTN addresses in SCFG. If your default address is a Z1 address, it is probably going to use that one for any other zones it does not find a
match for.

yea and that's what i was thinking would happen

There are also some settings in sbbsecho.ini, but I am not sure if it uses those for picking the zone to put on the netmail
or only to route it, i.e.

[node:2:ALL]
(stuff removed)
Route = 1:154/10
[node:3:ALL]
(stuff removed)
Route = 1:154/10
[node:4:ALL]
(stuff removed)
Route = 1:154/10

yea, but i dont know if that will designate the source address as opposed to the routing :D

regards
---

Charles Blackburn
The F.B.O BBS 21:1/221 618:250/36
bbs.thefbo.us IPV4/V6
DOVE-Net FSX-Net MicroNET USENET




... If you can't see the bright side, polish the dull side.
---
þ Synchronet þ The FBO BBS - bbs.thefbo.us - A place for aviation fun....

Re: Re: Automatic Network selection for netmail
By: Nightfox to Gamgee on Tue Oct 11 2022 18:08:06

Okay.... but for most (nearly all) current SBBS sysops, it's what is being used, I'd guess. I understand what you're
saying about *SBBS* not using sbbsecho.ini, but for all intents and purposes, the *BBS system*
is using it for knowing how to send/route netmail.

Yeah, that's basically how I think of it. Since sbbsecho is included with Synchronet (and I think has been since I started
using Synchronet), I tend to think of sbbsecho as a component of Synchronet/SBBS. And sbbsecho seems to do the job, and I

yea that's why i specifically said sbbsecho, it was part of it and i was following parts of the wiki so it makes sense to use it to me :D

don't know of another tosser I'd rather use in place of it.

as a brit, "tosser" has multiple connotations :D

regards
---

Charles Blackburn
The F.B.O BBS 21:1/221 618:250/36
bbs.thefbo.us IPV4/V6
DOVE-Net FSX-Net MicroNET USENET




... To a friends' house, the road is never long.
---
þ Synchronet þ The FBO BBS - bbs.thefbo.us - A place for aviation fun....

Re: Re: Automatic Network selection for netmail
By: Charles Blackburn to Nightfox on Fri Oct 14 2022 04:36 pm

don't know of another tosser I'd rather use in place of it.

as a brit, "tosser" has multiple connotations :D

:P

Nightfox

---
þ Synchronet þ Digital Distortion: digitaldistortionbbs.com